Sanrio Cinnamoroll Nanoblock: How to Build and Display

Quick Answer

Build the Sanrio Cinnamoroll Nanoblock by sorting pieces by color, following the diagram row by row, and pressing each brick firmly. Display the finished 2-inch figure on a shelf or inside a clear case to keep it dust-free.

How to Build and Display Your Cinnamoroll Nanoblock

1. 1. Sort and Prepare: Open the bag and separate pieces by color using the included sorting tray or a small bowl. Refer to the instruction booklet to identify each piece type. Common mistake: mixing similar shades (e.g., white and off-white) can lead to errors later. Checkpoint: verify you have all 160 pieces before starting.
2. 2. Build the Base and Body: Start with the base plate and follow the diagram from bottom to top. Press each brick firmly until you hear a soft click—nanoblocks need a snug fit. Common mistake: skipping the base alignment can make the figure wobbly. Checkpoint: after every 10 pieces, compare your build to the diagram.
3. 3. Attach the Kimono Details: Add the kimono pattern pieces one row at a time. The printed details are on specific bricks, so double-check their orientation before pressing down. Common mistake: placing a printed brick upside down will break the pattern. Checkpoint: hold the figure up to a light to see if the pattern lines match. If a piece feels loose, swap it with a spare from the same color batch.
4. 4. Finish with the Head and Ears: Attach the head section, then add the ears last. The ears are small and fragile—use tweezers if your fingers feel clumsy. Common mistake: pressing too hard on the ears can snap the connection point. Checkpoint: gently wiggle each ear to ensure it's secure.
5. 5. Display and Protect: Place the finished figure on a clean, level surface. For long-term display, use a small acrylic case or a dust cover to prevent dust buildup in the tiny crevices. Common mistake: putting it near a window or heat source can warp the plastic over time. Checkpoint: check the figure monthly for loose bricks and press them back in. Rotate the figure occasionally if it's in direct light to prevent uneven fading.

Product Details

• Sanrio Cinnamoroll Kimono Nanoblock Character Collection Series Constructible Figure: This constructible figure stands about 2 inches tall and uses 160 meticulously designed pieces with a difficulty level of 2, recommended for ages 12 and up. The 2-inch finished size means it fits easily into most display setups, and the moderate difficulty makes it a satisfying build without being overwhelming for beginners.